Can a portable power station run a dehumidifier?
Yes. 44 of 56 current portable power stations can run a dehumidifier: it needs at least 785 W of continuous output and 800 W to start. None holds the 7,388 Wh needed for 8 hours of nonstop use; the largest runs it nonstop for about 5.5 h.
How much battery does a dehumidifier need?
About 924 Wh per hour of use, after 15% inverter loss.
| Running time | Battery needed | Models that hold it | Smallest that does | Check price |
|---|---|---|---|---|
| 1 hour | 924 Wh | 41 | Goal Zero Yeti 1000 (998 Wh) | On Amazon |
| 8 hours (a night) | 7,388 Wh | 0 | none | |
| 24 hours (a day) | 22,165 Wh | 0 | none | |
| 3 days | 66,494 Wh | 0 | none |
How long does each size of power station run a dehumidifier?
Runtime scales with battery size: from about 0.6 h on the smallest station that can run it to about 5.5 h on the largest.
| Size | Can run it | Runtime range |
|---|---|---|
| Under 500 Wh | 0 of 9 | — |
| 500–999 Wh | 4 of 6 | 0.6 h – 1.1 h |
| 1,000–1,999 Wh | 16 of 17 | 1.1 h – 1.7 h |
| 2,000–2,999 Wh | 10 of 10 | 2.2 h – 2.8 h |
| 3,000 Wh and up | 14 of 14 | 3.3 h – 5.5 h |
Which power stations run a dehumidifier longest?
Where do these wattage figures come from?
| Low running draw | 650 W |
|---|---|
| Typical running draw | 785 W |
| High running draw | 785 W |
| Start-up draw | 800 W |
| Share of time running | Not cited, so runtimes are for nonstop use |
| Source | www.pubs.ext.vt.edu |
Which power stations can't run a dehumidifier, and why?
12 of 56 current models can't, for the reasons below.
Which models have too small an inverter?
| Model | Running draw | Station limit | Short by |
|---|---|---|---|
| BLUETTI Elite 100 mini | 785 W | 700 W (continuous) | 85 W |
| Goal Zero Yeti 700 | 785 W | 600 W (continuous) | 185 W |
| EcoFlow RIVER 2 Max | 785 W | 500 W (continuous) | 285 W |
| Goal Zero Yeti 500 | 785 W | 500 W (continuous) | 285 W |
| Goal Zero Yeti 300 | 785 W | 350 W (continuous) | 435 W |
| Jackery Explorer 300 | 785 W | 300 W (continuous) | 485 W |
| Anker SOLIX C300 | 785 W | 300 W (continuous) | 485 W |
| BLUETTI Elite 30 V2 | 785 W | 600 W (continuous) | 185 W |
| EcoFlow RIVER 3 Plus | 785 W | 600 W (continuous) | 185 W |
| Jackery Explorer 240 v2 | 785 W | 300 W (continuous) | 485 W |
| EcoFlow RIVER 2 | 785 W | 300 W (continuous) | 485 W |
| BLUETTI Elite 10 Mini | 785 W | 200 W (continuous) | 585 W |
How long does every current model run a dehumidifier?
44 current models can run it, from about 0.6 h on the DJI Power 500 to about 5.5 h on the Jackery Explorer 5000 Plus.
What is the cheapest way to run a dehumidifier?
The cheapest current model that can run a dehumidifier is the BLUETTI AC180 at $499 list, for about 1.2 h.
- 8 hours or more: no current single unit manages it; the longest single-unit runtime is about 5.5 h on the Jackery Explorer 5000 Plus.
- Most runtime per dollar: the BLUETTI Elite 400, about 0.3 h per $100 of list price.
How much does the dehumidifier's wattage change the runtime?
A lot: our sources put a dehumidifier anywhere from 650 W to 785 W. On the Jackery Explorer 1000 Plus (1,264 Wh), that is the difference shown below.
| Setting | Draw | Runtime |
|---|---|---|
| Low | 650 W | 1.7 h |
| Typical | 785 W | 1.4 h |
| High | 785 W | 1.4 h |
Which models give the most dehumidifier runtime per pound?
The Anker SOLIX S2000 leads, at about 4 minutes of dehumidifier per pound.
| Model | Weight | Runtime | Minutes per lb | Check price |
|---|---|---|---|---|
| Anker SOLIX S2000Amazon | 35.7 lb | 2.2 h | 4 | On Amazon |
| BLUETTI Elite 300Amazon | 58 lb | 3.3 h | 3 | On Amazon |
| Jackery Explorer 2000 v2Amazon | 39.5 lb | 2.2 h | 3 | On Amazon |
| Jackery HomePower 3000Amazon | 59.5 lb | 3.3 h | 3 | On Amazon |
| Jackery HomePower 2000 Plus v2Amazon | 41.4 lb | 2.2 h | 3 | On Amazon |
How many days does a charge last if you run the dehumidifier only part of the day?
On the Jackery Explorer 1000 Plus, a full charge lasts about 1.4 h of continuous dehumidifier use, which stretches across several days if you only run it a few hours at a time.
| Use per day | Days per full charge |
|---|---|
| 1 h | 1.4 |
| 2 h | 0.7 |
| 4 h | 0.3 |
Can solar panels keep a dehumidifier running?
With panels delivering 75% of their rating (our calculator's default), about 1,047 W of panels covers its average draw of about 785 W, so the battery holds steady while the sun is high. 27 current models can both run it and accept that much solar input.
What else can a power station run alongside a dehumidifier?
Each row counts the current models that can run both loads together, inside their running and start-up limits, and names the longest runner.
| Together | Runtime from full |
|---|---|
| dehumidifier + wi-Fi router / modem | 42 models; longest 5.3 h on the Jackery Explorer 5000 Plus |
| dehumidifier + refrigerator | 36 models; longest 5.0 h on the Jackery Explorer 5000 Plus |
| dehumidifier + TV | 42 models; longest 4.7 h on the Jackery Explorer 5000 Plus |
| dehumidifier + CPAP with heated humidifier | 42 models; longest 5.1 h on the Jackery Explorer 5000 Plus |
| dehumidifier + microwave oven | 37 models; longest 2.4 h on the Jackery Explorer 5000 Plus |
| dehumidifier + laptop | 42 models; longest 5.1 h on the Jackery Explorer 5000 Plus |
Which brands' lineups can run a dehumidifier?
| Brand | Models that can run it | Longest-running model | Check price |
|---|---|---|---|
| Anker SOLIX | 8 of 9 | Anker SOLIX F3800 Plus (4.2 h) | On Amazon |
| BLUETTI | 6 of 9 | BLUETTI Elite 400 (4.2 h) | On Amazon |
| DJI Power | 4 of 4 | DJI Power 2000 (2.2 h) | On Amazon |
| EcoFlow | 11 of 14 | EcoFlow DELTA Pro 3 (4.4 h) | On Amazon |
| Goal Zero | 3 of 6 | Goal Zero Yeti PRO 4000 (4.3 h) | On Amazon |
| Jackery | 12 of 14 | Jackery Explorer 5000 Plus (5.5 h) | On Amazon |
Running two at once doubles the draw and the start-up surge: 37 current models can handle two together.
Related
How this page was made. Specs come from each manufacturer's official US spec page or manual, checked on the date shown; specs a manufacturer doesn't publish are marked "Not published". Runtimes are calculated (capacity × 85% inverter efficiency ÷ appliance draw), not measured. We haven't hands-on tested these units. Method and sources · Affiliate disclosure